If you have a bent car door edge, it can be a real hassle. Not only does it make your car look bad, but it can also make the door difficult to close or open. The good news is that fixing a bent car door edge is pretty simple.
Check to see if your car has any damage. You may be able to bend the door back into place by yourself. If you’re not sure how to do this, or if it doesn’t work in the first place, take it to an auto repair shop for professional help.
Why Is Your Car Door Edge Bent?
There are several reasons why your car door edge might be bent. The most common cause of this problem is slamming the door shut too hard. If you slam the door shut too hard, it can put pressure on one side of the door frame and cause it to bend outward slightly.
This can also happen if there’s pressure on the hinge side of your door frame when closing it. The next time you open up that area where you place your feet while sitting in your car, check around and see if there are any items that might have been wedged underneath there before closing up tightly again so they don’t get stuck inside anymore.
What causes a car door edge to be bent?
The most common cause of a bent car door edge is that it has been impacted by another vehicle. This can happen during an accident or if you hit someone else’s car or object. The impact may be slight or severe, depending on the speed at which your car was traveling, the angle of impact, and whether the other car was moving fast enough to damage yours.
Another common cause of a bent car door edge is when you open your vehicle door and hit something stationary, like a wall or pole. This can happen if you fail to check behind you before exiting the vehicle. This type of damage is more likely to occur when parking in tight spaces or trying to get out of an alleyway where there are no overhead lights.
Some people may simply have a habit of opening car doors too forcefully without checking behind them first—which can result in damage to their own vehicle as well as others.
Use the pliers to remove the door handle. You can do this by pulling outward on the pin and releasing it from the latch in the direction of the door, but be careful not to break anything. Take your metal file and file down any sharp corners on the edge of your car door.
This makes it easier for you to push in when you’re trying to put everything back together. Place a rag under your car door so you don’t scratch the paint while you’re working on it. Then, use some WD-40 or other lubricant on the inside of your door and slide it back into place.
What You’ll Do?
1. Check to see if your car door is bent. If it is, have a professional fix it.
2. If your door isn’t bent, use a heat gun to soften the plastic and reshape it.
3. Once you’ve softened the plastic, use pliers to shape it back into place.
How to Do It?
Make sure you have a good quality body shop. You will need to get them to fix the damage before you can paint the door. Take off all of your interior trim and remove any panels that are covering up parts of the door. This includes headliners and kicks plates. If you don’t remove these bits, they may get damaged while painting.
If the car door is bent, determine the cause of the bend and then fix it
If the car door is bent, determine the cause of the bend and then fix it. If you don’t know why it’s bent, talk to your mechanic or auto body shop. A qualified professional can help you determine what caused the damage and how to fix it.
The first step in fixing a bent car door edge is determining whether or not the damage is superficial or structural. If the damage is superficial, meaning that it affects the paint only, then all you have to do is repaint or refinish it.
For more serious damage, consult with a professional who can assess how much work needs to be done and whether or not there are any underlying issues that need to be addressed before work can begin.
It is possible to fix a bent car door edge. It requires some patience and persistence, but the end result will be worth it! You can also use this method on other parts of your car that have been bent out of shape.