How to Tow a Rear Wheel Drive Car?

Towing a rear-wheel drive car is fairly straightforward, but there are a few things to keep in mind. The first step is to make sure the transmission is in neutral and the parking brake is on.

The next step is to make sure your tires are at least partially inflated and that you have some kind of tire gauge handy. It’s time to hook up the tow strap or chain! You’ll want to position the vehicle so that it’s as close as possible to being level with the hitch receiver on your tow vehicle.

Once you’ve done that, you can use your tow strap or chain to connect them together and start driving away.

Get the car ready

If you’re going to tow your rear-wheel drive car, you’ll want to make sure that it’s in good working order. Check that all of your fluid levels are topped up. You want to keep an eye on them for a few days before you tow so that you can make any adjustments needed before it’s too late.

Check the condition of your tires. If they’re bald or have been damaged in any way, replace them before you tow. Clear out any loose items from your car and make sure that all of your windows are rolled up tight.

Check your car’s manual

If you’re going to tow a rear-wheel drive car, it’s important to make sure that you check your car’s manual for the proper procedure. The manual will tell you how to properly engage and disengage the transmission and transfer case, as well as other steps to take before and during the trip. Check your car’s towing capacity.

Secure the vehicle with a tow bar

The first step to safely towing a rear-wheel drive car is to secure it with a tow bar. This will ensure that you are able to tow your vehicle without causing damage or injury to yourself or others.

To begin, make sure that you have a tow bar that is recommended for use with your particular vehicle. You will also need some tools and supplies, such as.

A jack and jack stand. An adjustable wrench. A flathead screwdriver. Wear gloves and eye protection while working on your car.

Start the engine and drive

If you have a rear-wheel drive car, all you need to do is start the engine and get going. There’s no need to worry about getting the car into neutral or anything since it will automatically shift into neutral when you stop.

Conclusion

Your best bet is to tow a rear-wheel drive vehicle with the wheels on a dolly. If you can’t tow your car with the wheels off the ground, then you’ll need to use a flatbed or a regular tow truck. If you’re going to use a dolly, make sure that it has good tires and enough clearance for the wheels to fit without rubbing against the side rails of your vehicle.

Steven Hatman
Steven Hatman

We break down every information into easy-to-understand articles that cover all the categories anyone who owns a car needs to know about, such as oil , brakes , tires and etc. Our car guide is free and updated regularly for you to use as a resource, not only when you have an issue with your car but even before buying a new or used car! We also give tips on what to look for in each category or part of your vehicle.