If you have a flat tire at night, pull over as soon as it’s safe to do so.Use your hazard lights to alert other drivers that you are on the side of the road and out of traffic.
But if you’re driving at night, it can be especially frustrating especially if you’re on the side of the highway with no cell service.
Here are some tips for handling a flat tire at night. If you’re still in danger from passing cars or passersby, try using flares and reflective triangles to make yourself more visible these might also help other drivers see where they’re going if they have trouble seeing at night or through foggy windows.
If there’s any way you can block off traffic from approaching your vehicle such as putting up cones or traffic cones do so .
If you have a spare tire and a jack, many new cars come equipped with run flat tires that can get you to a safe place at slow speeds.
Be sure to drive slowly and carefully if you’re using one of these. If all else fails,call for help.
Many roadside assistance programs will come out and change your tire for you, or at least tow your car to safety.
Make sure you’re in a safe location
If you are driving at night, you should know that you are safe place means safe location.
And make this session your own so that when you change tires you know that you are in a location.
Make sure your car is in park
Before you begin changing your tire. Make sure the car is in park and the emergency brake is on.
Place a wheel chock behind one of the back wheels to keep it from rolling, if possible.
Loosen the lug nuts with a wrench, but don’t remove them until you’ve jacked up the car.
Turn on your hazard lights
When you drive at night you have to keep your alerts lights on so that the cards on the way in and out can see you, and let them know that there is a car in front of us that lights the alarm. We have been told by Alert to stay away from me.
Use your phone as a flashlight
Just turn on your phone’s flashlight app, and shine it onto the tire so you can see what’s happening.
You’ll be able to tell if there’s a nail or something stuck in your tire, and then you’ll know how to proceed,to help you see in the dark.
Remove the flat tire, grasp it firmly and pull it directly towards you. Make sure to pull out the metal jack before putting your spare tire on.
Lower the car tighten lug nuts
Turn on the car’s engine and remove the jack. Use the wrench to tighten each of the lug nuts clockwise.
Put them back on as tightly as possible,but don’t use a power wrench or air compressor because that could cause damage.
Lower the car by turning the jack handle counterclockwise until it reaches its original position.
Check the air pressure in your spare tire
Checking the air pressure in your spare tire is an easy, quick thing to do when you have time.
If you don’t have time to do it, though,it’s a good idea to check it every day or two just in case and if you do discover a leak, you can fix it right away.
The most important thing is to make sure that your spare tire has enough air pressure in it so that it’s not too low when you need to use it.
If your spare tire has too little air in it, then the car may not be able to support itself on the road and could roll away from you when you’re trying to change out of a flat.
What should you do?
You’re driving home from work on a dark,rainy night. Suddenly, your car starts to vibrate and you hear a loud thinking noise coming from the back of your car.
You pull over to the side of the road and get out to investigate. You find that one of your tires has gone flat
It’s always best to call for help when it comes to changing a tire at night.
It’s not only safer for you, but it will also make it easier for you to find help if you need it
If you have tools in the trunk of your car, take them out now so they’re ready when you need them later on down the line.
Also make sure there is an inflated spare tire in case none of the others are good enough anymore either Remove the flat tire and the wheel bolts.
The wheel bolts are not going to come loose by themselves, so you will have to loosen them with a wrench or a socket wrench until they come out of their holes.
Once you have removed them, take off the wheel hubcap so you can get at your spare tire
Conclusion
It is important to have a spare tire and the tools to change it in your car, as you may find yourself in a situation where you need to change a flat tire.
This process can be done relatively easily if you are prepared ahead of time.