How to Fix Burn Hole in Car Seat?

You’ll need to first remove the fabric that has been burned.

You’ll want to sand down the area where the fabric was apply some heat-treated wood glue to the hole and then replace the fabric over it.

Use a paintbrush or sponge to apply some stain over top of your repair.

You can also opt for an oil-based stain for an even more durable finish.

Determine the cause of the burn hole

The first step in fixing a burn hole in a car seat in determining the cause of the burn hole.

If the burn mark was caused by an electrical short, then your best bet is to take it to a professional.

If it’s a cigarette burn, you can clean up the area with soap and water and use a hair dryer to dry it out.

If your car seat is leather, you can buy leather repair kits at many auto parts stores or online.

They come with instructions on how to apply them and what type of tools you’ll need.

What can you do to fix it?

Check to see if it’s an actual burn hole. If the burned area is small and surrounded by unaffected fabric, then you may be able to fix it yourself with a few simple steps.

Turn the car seat cover and remove any cushion pieces that might be causing trouble.

Then apply to rub alcohol directly onto the burned area and let it sit for about five minutes.

Use a clean rag or paper towel to dab away as much of the alcohol as possible before letting it dry overnight.

Once dry, re-soak the area with alcohol again for another five minutes before dabbing away again with a clean rag or paper towel.

Repeat this process until no more ink transfers from the rag onto the seat surface when you wipe over it with water.

You can also try using soap instead of alcohol if that works better for you!

open up the car seat

Open up the car seat and look at the inside. You want to see if there is a hole in the fabric or padding.

If there is, it could be a burn hole. If you find one, then you will need to replace that piece of the seat.

Find the burn hole

The first step in fixing a burn hole in your car seat is to find the hole.

If it’s small, you may be able to patch it with a piece of duct tape or another sticky substance. If the hole is larger, you’ll have to replace it entirely.

Remove the fabric from the cushion of the seat

Remove the foam from the cushion of your car seat.

Use a seam ripper to remove the stitches on both sides of each piece of fabric (if applicable).

Place a piece of new fabric over the burn hole, and then use a staple gun to secure it in place.

Clean the burn hole with a damp cloth

Clean the burn hole with a damp cloth. Then, allow the area to dry completely before applying a small amount of car seat repair kit onto the affected area.

Cover the repair with a piece of tape and allow it to dry for at least 24 hours before using your car seat again!

A patch kit

A patch kit is a simple solution to a problem that you don’t want to deal with.

You can go to any hardware store and pick one up, or you can order one online.

The kits come with everything you need to patch up your car seat, including the glue and paint for the job.

All you need to do is follow the directions on the box but don’t forget to cover up anything else in the area.

If you’re too hasty, you might accidentally get glue on your seats or floor mats.

Dye the area around the burn hole

Dyeing is one option for covering up a burn hole, especially if the area of the seat that has been damaged is small.

You’ll need to use a dye that matches your car’s interior color and then apply it with a paintbrush or other applicator tool.

If you’re worried about how well this will work, consider using an iron-on patch instead they come in many different colors and styles, so they should match your car’s interior just fine.

How do you fix it?

Take a deep breath. This happens to everyone, and it’s easy to repair.

Remove the cushion from your seat and set it aside. If you’re using a leather seat, make sure you have a leather repair kit on hand.

If not, use some common household supplies like rubbing alcohol or white glue.

Apply the rubbing alcohol or white glue over the burn mark with a cotton swab or.

Then let it dry completely before reattaching the cushion to your car seat.

Once everything is dry, reattach the cushion to your car seat and enjoy!


Are you know about this how to fix burn how in the car seat, and different steps to fix in your mind. Use these steps to cover the burn hole in your car.

Steven Hatman
Steven Hatman

We break down every information into easy-to-understand articles that cover all the categories anyone who owns a car needs to know about, such as oil , brakes , tires and etc. Our car guide is free and updated regularly for you to use as a resource, not only when you have an issue with your car but even before buying a new or used car! We also give tips on what to look for in each category or part of your vehicle.