How to Start a Car That Has Been Sitting for 1 Year?

Make sure that all of your doors are closed tightly so that there isn’t any extra air in the cabin. This will help prevent corrosion on the battery terminals and prevent current from flowing out of them.

Make sure all of your fluids are topped off the oil, coolant, transmission fluid, brake fluid, and power steering fluid. If they’re not full when you check them, replace them with fresh fluid that meets the manufacturer’s specifications.

Make sure your engine is low work

If you want to know how to start a car that has been sitting for 1 year, first you need to make sure that your engine is low work. If it is not low work, then you will have to fill it up with gasoline and water.

Once this is done, you can start the car by turning on the ignition. However, if your car isn’t working properly, then it may be best to take it to an auto shop for repair.

Make sure your transmission is low work

The first thing you should do is make sure your car’s transmission is low enough to the ground for you to be able to get under it. If it’s not, you might have to jack up one side of the car and move it onto blocks or ramps.

Once you’ve lowered the car, look at all of your fluids. Make sure they’re topped off and that there aren’t any leaks. You’ll also want to check the battery connections, starter connections, and fuses to ensure that everything is in working order.

If there are any problems with these items, address them before trying to start your car again.

Make sure your fuses low work

Make sure your fuses are all in order. If you have a spare set of fuses, you can use that to check and make sure everything is working properly. If everything looks good, try starting the car again.

Make sure your starter motor is clean now

Make sure your starter motor is clean. You can do this by checking for any build-up on the solenoid or starter cable. If these parts look dirty or oily, use a wire brush to remove the debris and ensure the connections are clean.

All the functions are very slow to work

The first thing you’ll notice when you turn the key in the ignition is that all the functions are very slow to work. The engine may go on, but it may not. You may be able to hear it turn over, but when you look in your rearview mirror, you’ll see that it doesn’t move at all.

If you have a manual transmission, try shifting into neutral and then back into the park. If you don’t have a manual transmission, try turning off the car and then turning it back on again. If this doesn’t work, try waiting 5 minutes before trying aga.

Make sure your battery is dead

If you don’t know if your battery is dead, you can just try to start the car. If it won’t start, the battery is probably dead and needs to be replaced. If it does start, you’ll need to replace the battery anyway because it wasn’t fully dead yet.

Take out the spark plugs and check them for corrosion. If they are corroded, replace them with new ones.


If you’re looking for a car that has been sitting for a year, look no further than. With, you’ll be able to start your car and drive it around with ease.

Steven Hatman
Steven Hatman

We break down every information into easy-to-understand articles that cover all the categories anyone who owns a car needs to know about, such as oil , brakes , tires and etc. Our car guide is free and updated regularly for you to use as a resource, not only when you have an issue with your car but even before buying a new or used car! We also give tips on what to look for in each category or part of your vehicle.