How to Start a Fuel Injected Car That Ran Out of Gas?

If you’re trying to start a fuel-injected car that ran out of gas, the first thing you should do is check the fuel gauge. If it’s less than 1/4 full, you’ll need to add more gas before starting. Once you’ve filled up your tank with gas, turn off the engine and wait for a few minutes.

Then, turn on the ignition and try to start it again. If it still doesn’t start, try turning on the lights and blower fan. This may get enough power running through the system so that it can ignite when you turn on the ignition again.

Turn on the ignition key and press the gas pedal

Turn on the ignition key and press the gas pedal. This will make sure that there’s still power getting to the engine. If this doesn’t work, try turning off the ignition for a few minutes and then turning it back on again. If that still doesn’t work, then try pressing down on the accelerator pedal again. If none of those things work, then you may have an issue with your fuel injection system and should consult with a mechanic as soon as possible.

Wait for the engine to turn over

Once you’ve tried to start your car and the engine doesn’t turn over, the next step is to wait for it to do so you can expect this process to take several minutes. The reason for this is that fuel injection systems work by having a sensor that tells your car’s computer when it’s time to send fuel into the combustion chamber at just the right moment. When your engine runs out of gas, it loses its ability to regulate how much fuel enters the chamber, so it simply keeps pumping in more and more until there’s no more room left inside.

Turn the key to the on position

If you’re stuck with a car that ran out of gas, the first thing to do is turn the key to the on position. This will allow you to hear if the engine is cranking. If you don’t hear anything, then your battery may be dead. If the engine does crank but doesn’t start, try turning it off and repeating the process multiple times until it starts. Once it does start, drive at least 10 miles for best results.

Press and hold down the accelerator pedal until you hear a click

The first step to starting your car is to press and hold down the accelerator pedal until you hear a click. This is your car’s fuel pump. The fuel injection system will be activated, which means that when you release the pedal, fuel should start flowing into your engine. If it does not flow freely, try pressing it again until you hear another click.

Release the accelerator pedal and wait for your car to start

The first step to starting a fuel-injected car that ran out of gas is to release the accelerator pedal. This will allow your car to start without having to overload it with fuel, which can cause it to stall.

Once you’ve released the accelerator, wait for your car to start up again. You may need to repeat this process several times before your car starts.


Starting a car that ran out of gas can be frustrating. You have probably been there before, and you know how it feels to have your car not even turned over. The good news is that there are ways to get your car started again.

Steven Hatman
Steven Hatman

We break down every information into easy-to-understand articles that cover all the categories anyone who owns a car needs to know about, such as oil , brakes , tires and etc. Our car guide is free and updated regularly for you to use as a resource, not only when you have an issue with your car but even before buying a new or used car! We also give tips on what to look for in each category or part of your vehicle.