If you’ve ever found yourself with a car door frozen shut, you know how frustrating it can be. We’ve all been there, whether we’re trying to get into our own car or our friend’s car. The good news is that there are several ways to unfreeze your car doors with vinegar.
A towel or rag
Grab a towel or rag and soak it in vinegar. Then, wrap the wet cloth around the keyhole. Let it sit for a few minutes while you get ready to unfreeze your car door.
Find the right kind of vinegar to use
The first step in unfreezing your car door is to find the right kind of vinegar. You’ll want to use white, distilled vinegar, not apple cider vinegar or something else that has different ingredients inside. Vinegar is an acid and will work best if you have a frozen lock that’s suffering from corrosion.
If you don’t have any vinegar on hand, then you can also try using rubbing alcohol or water. Just make sure you don’t use anything that contains chemicals like bleach or ammonia as these may damage your car’s finish when they come in contact with it.
Pour the vinegar into a spray bottle
When you’re trying to unfreeze your car doors, vinegar is a great option. Simply pour the vinegar into a spray bottle and apply it to the affected area of your car door. Let it sit for 10-15 minutes, then wipe away any remaining ice with a rag.
Vinegar can also be used in conjunction with other chemicals, like rubbing alcohol or hand sanitizer, which are both effective at breaking down the bonds that hold together water molecules.
Spray the door with vinegar and wait
Spray the door with vinegar and wait for about 30 minutes. Vinegar will help break down the frost, allowing it to melt away. You should see results within about 10 minutes if your car is outside in cold weather. If not, continue spraying and waiting until you see results.
Once your car door has been freed from its frozen state, give it a good wipe down with a dry cloth or paper towel to remove any remaining moisture or vinegar residue before closing it again.
Use Caution When Using Vinegar
Vinegar is a great tool for unfreezing car doors, but you should exercise caution when using it. If you use the wrong kind of vinegar or too much vinegar, you can damage your car door handle or even the car itself.
What do you need to do it?
Pour half a cup of warm water onto your rag or paper towel. This will help loosen the ice and make it easier to wipe away. If you don’t have access to warm water, you can also use hot water from the sink, but keep in mind that this will make it much more likely that your door handles get damaged if you’re not careful.
Open up your car door and pour some vinegar onto the lock, then wipe it off with a wet rag or paper towel. You should see bubbles form on the surface where you applied the vinegar; this means that it’s working. Be sure to apply enough vinegar so that there is enough liquid left over for wiping.
Do not use too much. Try not to let any liquid drip down into crevices or cracks it could cause damage if left there too long.
Wipe down all surfaces around your door handle with your wet rag or paper towel, including inside and outside panels as well as any moldings or trim pieces you might have around your doors these areas can sometimes be difficult to reach otherwise.
It is possible to unfreeze your car door with vinegar if you have a car door that is frozen shut. It’s also possible to unfreeze your car door with vinegar if you have a car door that was locked shut and its lock froze.