If you’re looking for a way to get rid of hot spots on your car’s rotors, consider washing your car with laundry detergent. Laundry detergent helps remove build-up on the rotor and the heat generated by driving will burn off any remaining residue.
You can use a bucket or a spray bottle to apply the detergent to your car’s rotors. If you’re using a bucket, mix one part laundry detergent with five parts water. If you’re using a spray bottle, mix one part laundry detergent with two parts water.
Check the rotors and pads
If you’ve got hot spots on your rotors, it means that either your pads are wearing out or there’s a problem with your brakes. If it’s the latter, make sure to get a professional to check them out ASAP they could be dangerous.
You can also check the pads yourself by pressing down on each pad until it clicks. If it clicks or feels squishy when you press down, that means it needs to be replaced.
Check the calipers
The calipers are a part of the braking system that opens and closes when you press down on the brakes to stop your car. If they are not working properly, they may cause hot spots to develop on your rotors.
When the calipers do not function properly, they can create uneven pressure on the brakes and cause them to overheat. This causes hotspots on your rotors which wear out faster than normal.
If you notice that there is a problem with your car’s braking system, it is important that you have it checked by a professional mechanic immediately
Check the rotor hat
The rotor hat is the part of your car’s brake system that helps dissipate heat. It’s typically made of cast iron or aluminum, and it sits on top of the rotor to protect it from damage.
If you’ve noticed a hot spot on your rotors and you’re wondering if something is wrong with them, check to make sure your rotor hat isn’t warped or damaged in any way.
Check the brake drums
Check the brake drums. If they’re bent or damaged in any way, they might not be able to get a good grip on the rotor, which leads to poor braking performance.
Make sure that your brakes are properly lubricated so that they don’t squeak or squeal when you use them.
If you see a hot spot on one of your brake rotors, bring it in to an auto shop for inspection because there may be a problem with one of the other parts in this system.
How do you get rid of them?
To get rid of hot spots on rotors, you need to either sand the rotor or replace it. If you’re just starting out and don’t have a lot of money to spend, sanding is a great option.
You can use any kind of sandpaper whether it’s emery cloth or finer-grain sandpaper and just rub it along the rotor until it feels smooth. If there are still bits that feel rough after this process, try doing it again and going over those areas more slowly, until they feel smooth as well.
You can also use an electric sander if you want something faster or want a more precise finish. Just be careful not to overdo it with this method; if you go too fast or use too much pressure, you’ll end up with even bigger hot spots on your rotors.
Conclusion
it is important to note that there are many factors that contribute to hot spots on rotors. While some of these factors can be controlled, others cannot.
If you are experiencing a hot spot on your rotor and are unsure of the cause, contact your local [company name] dealer to get advice from one of our technicians.
