If you want to make your remote start work with your check engine light on, you’ll need to do some research. The first thing you’ll want to do is find out what kind of system you have.
If it’s an older-style system, which uses a solenoid in the distributor, then it’s not possible for your remote start to work with your check engine light on. If it’s a newer-style system, then there are ways around this issue.
If you have an older car and want to know if it has a solenoid in the distributor, look at how your starter works if the starter engages when you turn the key just slightly, then there’s no way it can work with a remote start because the solenoid would be engaged.
If it engages when the key is turned completely, then there may be a chance that your car can work with a remote start but only after some modifications are made.
Turn the engine off and disconnect the battery
If you want to make your remote start work with the check engine light on, you need to turn the engine off and disconnect the battery. When you disconnect the battery, the vehicle will lose all of its stored memory, including programming for the remote starter.
If you were using a keyless entry system prior to disconnecting your battery, you’ll need to reprogram it when you reconnect it. If you’re using a keyless entry system with a remote start system, be sure that your vehicle has been programmed properly before attempting this procedure.
Wait for at least 10 minutes, then reconnect the battery
If the check engine light comes on while you’re making a remote start, try reconnecting the battery. Wait for at least 10 minutes, then reconnect the battery. This will reset the computer and clear any error codes that may be causing the problem.
Check for a code stored in your car’s computer system
If you’ve ever had trouble with your car’s remote start system and the check engine light is on, it can be frustrating to try to figure out what’s wrong. The truth is that there are a lot of things that could be causing your check engine light to come on, and many of them aren’t actually related to your remote start system at all.
But if you’ve got a code stored in your car’s computer system and the check engine light is on, then you’re probably going to want to focus on that first. Here are some tips for making sure that you have all of the information you need before you start working on your car.
Check your owner’s manual for information about what codes mean and what problems with your car. If there are multiple codes stored, look up each one individually. Make sure that you take notes on everything that happens during your troubleshooting process so that when you go back through them later, they make sense.
Why does the check engine light come on?
The check engine light comes on when there is a problem with the vehicle’s emissions system. The emission control system includes the catalytic converter and any other components that are necessary to reduce harmful gases in the exhaust.
The check engine light may also be triggered by problems with the oxygen sensor, which is another component of the emission control system.
When you turn on your car’s remote start feature, it sends a coded signal to the vehicle to tell it to start running. If there is an issue with your car’s emission control system, this signal may not be received properly and your car will not start as it should.
How to make remote start work with the check engine light on?
A common misconception is that you can’t use remote start with a check engine light on. But you can! You just need to know what to do. You’ll want to make sure that your car is in good running condition. This means that if there’s something wrong with your car like the check engine light you should have it fixed before trying to remote start.
If you’ve got that covered, then here’s what you do. Start your car normally. When the engine is warmed up, shut off the ignition and open the door as if you were getting out of the car The check engine light should come on immediately after turning off your ignition and opening the door.
Conclusion
It’s important to remember that your check engine light is not an enemy. It tells you when something is wrong or needs attention and helps you keep your vehicle running smoothly.
If you’re using a remote start system and the check engine light comes on after the car starts, try turning off the remote starter for a little bit and then putting it back on.
